holden.wiki

• MODEL SELECTION INDEX
• MY 2003 VY & V2 II SERIES - SERVICE INFORMATION
• SECTION 7C4 - HYDRA-MATIC 4L60-E AUTOMATIC TRANSMISSION – ON-VEHICLE SERVICING
  • 1. GENERAL INFORMATION
    • 1.1 GENERAL SERVICE PRECAUTIONS
      • RECOMMENDATIONS
      • OIL COOLER PIPES
  • 2. MAINTENANCE AND GENERAL INFORMATION
    • 2.1 FLUID LEVEL CHECK
      • GENERAL INFORMATION
      • TRANSMISSION FLUID COLOUR
      • TRANSMISSION FLUID CHECKING PROCEDURE
    • 2.2 TRANSMISSION COOLER REVERSE FLUSH AND FLOW RATE CHECK – ALL
      • REVERSE FLUSH
      • FLOW RATE CHECK
  • 3. ON-VEHICLE SERVICE OPERATIONS
    • 3.1 FLUID CHANGE & FILTER REPLACE
    • 3.2 SELECTOR LINKAGE
      • REMOVE
      • INSPECT
      • REINSTALL
      • ADJUST
    • 3.3 SELECTOR CONTROL LEVER ASSEMBLY
      • REMOVE
      • DISASSEMBLE
      • REASSEMBLE
      • REINSTALL
    • 3.4 NEUTRAL START AND BACK-UP LAMP SWITCH
      • REMOVE
      • REINSTALL
      • ADJUST
    • 3.5 VEHICLE SPEED SENSOR
      • REMOVE
      • REINSTALL
    • 3.6 MANUAL SHAFT OIL SEAL
      • REPLACE
    • 3.7 CASE EXTENSION OIL SEAL
      • REPLACE
    • 3.8 EXTENSION HOUSING AND/OR BUSH
      • REPLACE
    • 3.9 1-2 ACCUMULATOR ASSEMBLY
      • REMOVE
      • CLEAN AND INSPECT
      • REINSTALL
    • 3.10 CONTROL VALVE BODY WIRING HARNESS
      • REMOVE
      • REINSTALL
    • 3.11 CONTROL VALVE BODY
      • REMOVE
      • DISASSEMBLE, CLEAN, INSPECT AND REASSEMBLE
      • REINSTALL
    • 3.12 SPACER PLATE, CHECK BALLS, FILTER SCREENS AND 3-4 ACCUMULATOR
      • REMOVE
      • CLEAN AND INSPECT
      • REINSTALL
    • 3.13 FILLER TUBE
      • REPLACE
    • 3.14 TRANSMISSION ASSEMBLY
      • REMOVE
      • REINSTALL
    • 3.15 TRANSMISSION COOLER PIPES/HOSES
      • V6 ENGINES – REMOVE
      • V6 ENGINES – REINSTALL
      • GEN III V8 ENGINE – REMOVE
      • GEN III V8 ENGINE – REINSTALL
  • 4. SPECIFICATIONS
  • 5. TORQUE WRENCH SPECIFICATIONS
  • 6. SPECIAL TOOLS